Alcatel-Lucent 7450 Manual page 400

cspf
Syntax cspf to ip-address
Context tools>perform>router>mpls
Sample Output
*A:Dut-C# /tools perform router mpls cspf to 10.20.1.6
Req CSPF for all ECMP paths
Priority 0 TE Class: 7
CSPF Path
To
Path 1
Rtr:
Rtr:
Path 2
Rtr:
Rtr:
*A:Dut-C#
force-switch-path
Syntax force-switch-path [lsp lsp-name] [path path-name]
Context tools>perform>router>mpls
Description Use this command to move from a standby path to any other standby path regardless of
priority.
The no form of the command reverts to priority path.
Parameters
lsp-name — Specifies an existing LSP name to move.
path-name — Specifies the path name to which to move the specified LSP.
Page 400
from: this node to: 10.20.1.6 w/(no Diffserv) class: 0 , setup Priority 7, Hold
: 10.20.1.6
: (cost 2000)
Src: 10.20.1.3 (= Rtr)
Egr: unnumbered lnkId 4
10.20.1.5
Egr: unnumbered lnkId 3
10.20.1.6
Dst: 10.20.1.6 (= Rtr)
: (cost 2000)
Src: 10.20.1.3 (= Rtr)
Egr: unnumbered lnkId 5
10.20.1.4
Egr: unnumbered lnkId 3
10.20.1.6
Dst: 10.20.1.6 (= Rtr)
-> Ingr:
(met 1000)
-> Ingr:
(met 1000)
-> Ingr:
(met 1000)
-> Ingr:
(met 1000)
unnumbered lnkId 2
unnumbered lnkId 3
unnumbered lnkId 5
unnumbered lnkId 2
7450 ESS MPLS Guide