Alcatel-Lucent 7450 Manual page 761

Sample Output
*A:Dut-A# show router ldp parameters
===============================================================================
LDP Parameters (IPv4 LSR ID 10.20.1.1:0)
===============================================================================
-------------------------------------------------------------------------------
Graceful Restart Parameters
-------------------------------------------------------------------------------
Graceful Restart
Nbor Liveness Time : 120 sec
-------------------------------------------------------------------------------
IPv4 Interface Parameters
-------------------------------------------------------------------------------
Keepalive Timeout
Hold Time
Transport Address
-------------------------------------------------------------------------------
IPv6 Interface Parameters
-------------------------------------------------------------------------------
Keepalive Timeout
Hold Time
Transport Address
-------------------------------------------------------------------------------
Targeted Session Parameters
-------------------------------------------------------------------------------
Import Pfx Policies: None
Prefer Tunl-in-Tunl: Disabled
-------------------------------------------------------------------------------
IPv4 Targeted Session Parameters
-------------------------------------------------------------------------------
Keepalive Timeout
Hold Time
Hello Reduction
-------------------------------------------------------------------------------
IPv6 Targeted Session Parameters
-------------------------------------------------------------------------------
Keepalive Timeout
Hold Time
Hello Reduction
===============================================================================
*A:Dut-A#
7450 ESS MPLS Guide
Label
Auth
Passive-Mode
Targeted-Sessions
(IPv6 LSR ID 3ffe::a14:101[0])
: Disabled
: 30 sec
: 15 sec
: system
: 30 sec
: 15 sec
: system
: 30 sec
: 15 sec
: Disabled
: 40 sec
: 45 sec
: Disabled
Description (Continued)
Enabled — Authentication using MD5 message based digest proto-
col is enabled.
Disabled — No authentication is used.
true — LDP responds only when it gets a connect request from a
peer and will not attempt to actively connect to its neighbors.
false — LDP actively tries to connect to its peers.
true — Targeted sessions are enabled.
false — Targeted sessions are disabled.
Max Recovery Time
Keepalive Factor
Hello Factor
Keepalive Factor
Hello Factor
Export Pfx Policies : None
SDP Auto Targ Sess
Keepalive Factor
Hello Factor
Hello Reduction Fctr: 3
Keepalive Factor
Hello Factor
Hello Reduction Fctr: 3
LDP
: 120
: 3
: 3
: 3
: 3
: Enabled
: 3
: 3
: 4
: 3
Page 761