Mpls-Tp Path Configuration - Alcatel-Lucent 7450 Manual

to <a.b.c.d>
<lsp-name>
"lsp-32"
"lsp-40"
status {up|down}
from <ip-address>
detail
*A:mlstp-dutA# show router mpls tp-lsp "lsp-
"lsp-32"
"lsp-40"
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32"
===============================================================================
MPLS MPLS-TP LSPs (Originating)
===============================================================================
LSP Name
-------------------------------------------------------------------------------
lsp-32
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" detail
===============================================================================
MPLS MPLS-TP LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name
LSP Type
From Node Id: 0.0.3.233+
Adm State
LSP Up Time : 0d 04:50:47
Transitions : 1
DestGlobalId: 42

MPLS-TP Path configuration.

This can reuse and augment the output of the current show commands for static LSPs. They
should also show if BFD is enabled on a given path. If this referring to a transit path, this should
also display (among others) the path-id (7 parameters) for a given transit-path-name, or the transit-
path-name for a given the path-id (7 parameters)
show>router>mpls>tp-lsp>path
A sample output is as follows:
===============================================================================
*A:mlstp-dutA#
7450 ESS MPLS Guide
"lsp-33" "lsp-34" "lsp-35"
"lsp-41"
"lsp-33" "lsp-34" "lsp-35"
"lsp-41"
: lsp-32
: MplsTp
: Up
show router mpls tp-lsp path
"lsp-36" "lsp-37"
"lsp-36" "lsp-37"
To Tun
Id
0.0.3.234 32
LSP Tunnel ID
To Node Id
Oper State
LSP Down Time
Path Changes
DestTunnelNum
MPLS and RSVP
"lsp-38" "lsp-39"
"lsp-38" "lsp-39"
Protect Adm Opr
Path
No Up Up
: 32
: 0.0.3.234
: Up
: 0d 00:00:00
: 2
: 32
Page 95