Alcatel-Lucent 7450 Manual page 248

MPLS Commands
mbps — Specifies the minimum difference between the current bandwidth reservation of the LSP and
fc
Syntax fc fc-name sampling-weight sampling-weight
no fc
Context config>router>mpls>lsp-template>auto-bandwidth
Description This command configures the sampling weight.
max-bandwidth
Syntax max-bandwidth mbps
no max-bandwidth
Context config>router>mpls>lsp>auto-bandwidth
config>router>mpls>lsp-template>auto-bandwidth
Description This command configures the maximum bandwidth that auto-bandwidth allocation is allowed to
request for an LSP.
The LSP maximum applies whether the bandwidth adjustment is triggered by normal adjust-interval
expiry, the overflow limit having been reached, or manual request.
The no form of the command means max-bandwidth is 100 Gbps.
The max-bandwidth must be greater than the min-bandwidth.
Default no max-bandwidth
Parameters mbps — Specifies the maximum bandwidth in mbps.
Page 248
the (measured) maximum average data rate, expressed as an absolute bandwidth (mbps), for
increasing the bandwidth of the LSP
Values
0 — 100000
Default 0
Values
0 — 100000
Default 0
7450 ESS MPLS Guide