Gmpls Command Reference; Command Hierarchies; Lmp Commands - Alcatel-Lucent 7450 Manual

GMPLS Command Reference

Command Hierarchies

• LMP Commands on page 459
• GMPLS Commands on page 460
• GMPLS Tunnel Group Commands on page 461
• Show Commands on page 461
• Clear Commands on page 461
• Debug Commands on page 462
• Tools Commands on page 462

LMP Commands

config
7450 ESS MPLS Guide
— router
— [no] lmp
— gmpls-loopback-address
— no gmpls-loopback-address
— [no]
— [no]
— [no]
ip-address
peer peer-node-id
— [no] control-channel lmp-cc-id
— hello [interval hello-interval] dead-interval hello-dead-interval
— hello interval hello-interval [dead-interval hello-dead-interval]
— peer-interface-address
— setup-role {active | passive}
— [no] shutdown
— peer-loopback-address
— no peer-loopback-address
— retransmission-interval
— retry-limit limit
— no retry-limit
— [no] te-link te-link-id
— [no] shutdown
te-link te-link-id
— [no] data-bearer data-bearer-id
— [no] port port-id
— remote-id remote-id
— no remote-id
— [no] shutdown
— link-name te-link-name
— no link-name
— remote-id remote-id
— no remote-id
— [no] shutdown
shutdown
ip-address
ip-address
milliseconds
GMPLS
Page 459