Ldp Command Reference; Configuration Commands - Alcatel-Lucent 7450 Manual

LDP Command Reference

Configuration Commands

LDP Commands
config
7450 ESS MPLS Guide
• LDP Commands on page 637
• Show Commands on page 641
• Clear Commands on page 644
• Debug Commands on page 644
• Tools Commands on page 645
— router
— [no] ldp
— [no]
— egress-statistics
— export
— no
— [no]
— [no]
— fec-originate
interface interface-name
— fec-originate
[swap-label out-label]
— fec-originate
[swap-label out-label] interface interface-name
— fec-originate
— no
— no
— no
— no
— [no]
— [no]
— import
— no
aggregate-prefix-match
— prefix-exclude policy-name [policy-name...(up to 5 max)]
— no prefix-exclude
— [no] shutdown
— [no] fec-prefix ip-prefix[/mask]
— accounting-policy
— no accounting-policy
— [no] collect-stats
— [no] shutdown
policy-name [policy-name...(up to 5 max)]
export
export-tunnel-table policy-name
fast-reroute
ip-prefix/mask [advertised-label in-label] [swap-label out-label]
ip-prefix/mask [advertised-label i in-label] next-hop ip-address
ip-prefix/mask [advertised-label in-label] next-hop ip-address
ip-prefix/mask [advertised-label in-label] pop
fec-originate ip-prefix/mask interface interface-name
fec-originate ip-prefix/mask next-hop ip-address
fec-originate ip-prefix/mask next-hop ip-address interface interface-name
fec-originate ip-prefix/mask pop
graceful-restart
— maximum-recovery-time
— no maximum-recovery-time
— neighbor-liveness-time
— no neighbor-liveness-time
implicit-null-label
policy-name [policy-name...(up to 5 max)]
import
LDP Commands
policy-id
interval
interval
Page 637