Alcatel-Lucent 7450 Manual page 798

Show Commands
peer
Syntax [no] peer ip-address
Context debug>router>ldp
Description
Use this command for debugging an LDP peer.
Parameters ip-address — The IP address of the LDP peer.
event
Syntax [no] event
Context debug>router>ldp>if
debug>router>ldp>peer
Description
This command configures debugging for specific LDP events.
bindings
Syntax [no] bindings
Context debug>router>ldp>peer>event
Description This command displays debugging information about addresses and label bindings learned from LDP
peers for LDP bindings.
The no form of the command disables the debugging output.
messages
Syntax [no] messages
Context debug>router>ldp>if>event
debug>router>ldp>peer>event
Description This command displays specific information (for example, message type, source, and destination)
regarding LDP messages sent to and received from LDP peers.
The no form of the command disables debugging output for LDP messages.
Page 798 7450 ESS MPLS Guide