Alcatel-Lucent 7450 Manual page 330

Auto BW
AB OpState
Auto BW Min
Auto BW Max
AB Up Thresh
AB Down Thresh
AB Up BW
AB Down BW
AB Coll Intv
AB Adj Mul
AB Samp Mul
AB Adj Time
AB Sample Time
AB Adj Cnt
AB Samp Cnt
AB Last Adj
AB Next Adj
AB Adj Cause
Page 330
Label
Enabled – Auto-bandwidth adjustment is configured on this LSP.
Up – Auto-bandwidth is operationally enabled on this LSP
Down – Auto-bandwidth is operationally disabled on this LSP
The minimum bandwidth of the LSP that auto-bandwidth can request
(in Mbps).
The maximum bandwidth of the LSP that auto-bandwidth can
request (in Mbps).
The percent threshold for increasing LSP bandwidth.
The percent threshold for decreasing LSP bandwidth.
The absolute bandwidth threshold for increasing LSP bandwidth (in
Mbps).
The absolute bandwidth threshold for decreasing LSP bandwidth (in
Mbps).
The auto-bandwidth collection interval.
The adjust-multiplier for this LSP (may be configured or inherited).
The sample-multiplier for this LSP (may be configured or inherited).
The adjust-multiplier times the collection-interval (in Mins).
The sample-multiplier times the collection-interval (in Mins).
The adjust count (number of whole collection intervals since the start
of the current adjust interval).
The sample count (number of whole collection intervals since the
start of the current sample interval).
The system time of the last auto-bandwidth adjustment.
The approximate remaining time in the current adjust interval
(adjust-multiplier – adjust count) times the collection interval (in
Mins). This overstates the actual remaining time because the elapsed
time in the current collection interval is not accounted for.
The cause of the last auto-bandwidth adjustment:
• none – no adjustment has occurred
• manual
• adj-count
• overflow
Description
7450 ESS MPLS Guide