Alcatel-Lucent 7450 Manual page 507

=================================================================================
Total LSP Count: 1
path
Syntax path [path-name] [detail]
Context tools>dump>router>gmpls
Description This command dumps information about paths. Configuring the path-name parameter will only dump
information about the specified path.
Parameters
path-name — The name of the path. 32 characters max.
detail — Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path
<path-name>
"empty"
detail
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2"
Path "2",
Flags: 0x0
Total Path Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2" detail
-------------------------------------------------------------------------------
Path "2",
AdminState: UP,
LastChange: 02/04/2015 23:30:34
NumHops: 2,
-------------------------------------------------------------------------------
Total Path Count: 1
7450 ESS MPLS Guide
Hop 2 : Unnumbered RouterId 10.27.255.213, InterfaceId 1010702
UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
SRLG List 27
Hop 3 : Unnumbered RouterId 10.27.255.213, InterfaceId 13000
UpStreamLabel 0, DnStreamLabel 101070230, Flags 0x0
SRLG List 4
Hop 4 : Unnumbered RouterId 10.27.255.219, InterfaceId 13001
UpStreamLabel 101070230, DnStreamLabel 0, Flags 0x0
Hop 5 : Unnumbered RouterId 10.27.255.219, InterfaceId 1010702
UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
SRLG List 27
Hop 6 : Unnumbered RouterId 72.72.72.72, InterfaceId 1010702
UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
"2" "3"
PathIndex: 2,
PathIndex: 2
OperState:UP
LspPathCount: 1,
Hop: 1, NodeId: 52.52.52.52,
LastChange: 02/04/2015 23:30:34
Hop: 2, NodeId: 10.27.255.219,
LastChange: 02/04/2015 23:30:34
"5"
NumHops: 2, LspPathCount: 1,
EmptyPathLspBindCount: 0, Flags: 0x0
TeLinkId: 1010702,
TeLinkId: 1010702,
GMPLS
EmptyPathLspBindCount: 0,
Loose
Strict
Page 507