Alcatel-Lucent 7450 Manual page 247

adjust-down
Syntax adjust-down percent [bw mbps]
no adjust-down
Context config>router>mpls>lsp>auto-bandwidth
config>router>mpls>lsp-template>auto-bandwidth
Description This command configures the minimum threshold for decreasing the bandwidth of an LSP based on
active measurement of LSP bandwidth.
The no form of this command is equivalent to adjust-down 5.
Default no adjust-down
Parameters
percent — Specifies the minimum difference between the current bandwidth reservation of the LSP
mbps — Specifies the minimum difference between the current bandwidth reservation of the LSP and
adjust-up
Syntax adjust-up percent [bw mbps]
no adjust-up
Context config>router>mpls>lsp>auto-bandwidth
config>router>mpls>lsp-template>auto-bandwidth
Description This command configures the minimum threshold for increasing the bandwidth of an LSP based on
active measurement of LSP bandwidth.
The no form of this command is equivalent to adjust-up 5.
Default no adjust-up
Parameters
percent — Specifies the minimum difference between the current bandwidth reservation of the LSP
7450 ESS MPLS Guide
and the (measured) maximum average data rate, expressed as a percentage of the current
bandwidth, for decreasing the bandwidth of the LSP.
Values
1 — 100
Default 5
the (measured) maximum average data rate, expressed as an absolute bandwidth (mbps), for
decreasing the bandwidth of the LSP.
Values 0 — 100000
Default 0
and the (measured) maximum average data rate, expressed as a percentage of the current
bandwidth, for increasing the bandwidth of the LSP.
Values
1-100
Default 5
MPLS and RSVP
Page 247