Debug Commands - Alcatel-Lucent 7450 Manual

Debug Commands

The following output shows debug LDP configurations discussed in this section.
A:ALA-12# debug router ldp peer 10.10.10.104
A:ALA-12>debug>router>ldp# show debug ldp
debug
exit
A:ALA-12>debug>router>ldp#
ldp
Syntax [no] ldp
Context debug>router
Description
Use this command to configure LDP debugging.
interface
Syntax [no] interface interface-name family
Context debug>router>ldp
Description Use this command for debugging an LDP interface.
Parameters interface-name — The name of an existing interface.
family — Specifies the family type.
7450 ESS MPLS Guide
router "Base"
ldp peer 10.10.10.104
event
bindings
messages
exit
packet
hello
init
keepalive
label
exit
exit
exit
Values ipv4, ipv6
LDP
ldp
Page 797