Alcatel-Lucent 7450 Manual page 316

Label Owner
In-use labels in
entire range
Sample Output
*A:mlstp-dutA# show router mpls label-range
===============================================================================
Label Ranges
===============================================================================
Label Type
-------------------------------------------------------------------------------
Static-lsp
Static-svc
Dynamic
===============================================================================
*A:SRU4>config>router>mpls#
=================================================================
MPLS Label 202
=================================================================
Label
-----------------------------------------------------------------
202
-----------------------------------------------------------------
In-use labels in entire range
=================================================================
*A:SRU4>config>router>mpls#
label-range
Syntax label-range
Context show>router>mpls
Description
This command displays the MPLS label range.
Output MPLS Label Range Output — The following table describes the MPLS label range output fields.
Label Type
Start Label
End Label
Aging
Page 316
Label
The label owner.
The total number of labels being used by RSVP.
Start Label
32
16416
32800
Label Type
static-lsp
Label
Displays the information about static-lsp, static-svc, and dynamic
label types.
The label value assigned at the ingress router.
The label value assigned for the egress router.
The number of labels released from a service which are transitioning
back to the label pool. Labels are aged 15 seconds.
Description
End Label Aging
16415 -
32799 -
131071 0
show router mpls label 202
Label Owner
STATIC
: 5057
Description
Total Available
16364
16376
98268
7450 ESS MPLS Guide