Configuring Gmpls With Cli - Alcatel-Lucent 7450 Manual

Configuring GMPLS with CLI

This section provides information to configure UNI GMPLS using the command line
interface.
Topics in this section include:
7450 ESS MPLS Guide
• GMPLS Configuration Overview on page 436
• LMP and IPCC Configuration on page 437
→
Configuration of IP Communication Channels for LMP and RSVP on page 437
→
Configuring LMP on page 437
→
Configuring Traffic Engineering Links and Data Bearers on page 439
• Configuring MPLS Paths for GMPLS on page 442
• Configuring RSVP in GMPLS on page 444
• Configuring a GMPLS LSP on the UNI on page 446
→
gLSP Constraints on page 448
• Bandwidth on page 449
• Shared Risk Link Groups on page 450
• Optical Network Segment Recovery on page 452
• Configuration of End-to-End GMPLS Recovery on page 453
• GMPLS Tunnel Groups on page 454
• Configuring IP and MPLS in an Overlay Network to Use a GMPLS LSP on page 456
• Configuration Notes on page 457
GMPLS
Page 435