Alcatel-Lucent 7450 Manual page 777

session
Syntax session [ip-addr[label-space]] local-addresses [sent|recv] ip-addr
session [ip-addr[label-space]] [session-type] [state state] [summary|
session [ip-addr[label-space]] local-addresses [sent|recv] [family]
session [ip-addr[label-space]] [sent|recv] overload [fec-type fec-type]
session [sent|recv] overload [fec-type fec-type] [family]
session [ip-addr[label-space]] statistics [packet-type] [session-type]
session statistics [packet-type] [session-type] [family]
session [session-type] [state ]state [summary|detail] [family]
Context show>router>ldp
Description This command displays configuration information about LDP sessions.
Parameters ip-address — Specify the IP address of the LDP peer.
label-space — Specifies the label space identifier that the router is advertising on the interface.
detail — Displays detailed information.
statistics packet-type — Specify the packet type.
session-type — Specifies to display the session type.
Output LDP Session Output — The following table describes LDP session output fields.
7450 ESS MPLS Guide
ip-address
detail]
Values 0 — 65535
Values hello, keepalive, init, label, notification, address
Values
link, targeted, both
Label
Peer LDP ID
Adj Type
State
Mesg Sent
Mesg Rcvd
Up Time
The IP address of the LDP peer.
The adjacency type between the LDP peer and LDP session is targeted.
Link — Specifies that this adjacency is a result of a link hello.
Targeted — Specifies that this adjacency is a result of a targeted
hello.
Established — The adjacency is established.
Trying — The adjacency is not yet established.
The number of messages sent.
The number of messages received.
The amount of time the adjacency has been enabled.
Description
LDP
Page 777