Alcatel-Lucent 7450 Manual page 345

p2mp-info
Syntax p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
Context show>router>mpls
Description
This command displays P2MP cross-connect information.
Parameters type — Specifies the P2MP type.
Sample Output
*A:Dut-C# show router mpls p2mp-info
========================================================================
MPLS P2MP Cross Connect Information
========================================================================
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address
P2MP ID
S2L Name
In Interface
Num. of S2ls
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address
P2MP ID
S2L Name
In Interface
Num. of S2ls
7450 ESS MPLS Guide
Values
originate — Specifies to display the static LSPs that originate at this virtual router.
transit — Specifies to display the static LSPs that transit through this virtual router.
terminate — Specifies to display the static LSPs that terminate at this virtual
router.
: 10.20.1.1
: 4000
: ipmsi-4000-73729::pa* To
: 1/1/1
: 1
: 10.20.1.1
: 65535
: ipmsi-65535-73730::p* To
: 1/1/1
: 1
MPLS and RSVP
Tunnel ID : 61441
Lsp ID : 29696
: 10.20.1.3
In Label : 262129
Tunnel ID : 61442
Lsp ID : 30208
: 10.20.1.3
In Label : 262128
Page 345