Alcatel-Lucent 7450 Manual page 484

GMPLS Commands
te-link
Syntax [no] te-link te-link-id
Context config>router>gmpls
Description
This command enables the use of a Traffic Engineering (TE) Link (which has previously been
configured under config>router>lmp) in GMPLS.
The no form of this command reverts to the default value.
Default no te-link
Parameters te-link-id — Specifies the ID or name of the configured TE Link.
shutdown
Syntax [no] shutdown
Context config>router>gmpls>te-link
Description
This command enables or disables the TE Link in GMPLS.
Default no shutdown
Page 484
Values 1 — 4294967295 | te-link-name
te-link-name: 32 character maximum name of the TE Link
7450 ESS MPLS Guide