Alcatel-Lucent 7450 Manual page 291

fc
Syntax fc fc-name class-type ct-number
no fc fc-name
Context config>router>rsvp>diffserv-te
Description
This command maps one or more system forwarding classes to a Diff-Serv Class Type (CT).
The default mapping is shown in the following table.
The no form of this command reverts to the default mapping for the forwarding class name.
Parameters class-type ct-number — The Diff-Serv Class Type number. One or more system forwading classes
te-class
Syntax te-class te-class-number class-type ct-number priority priority
no te-class te-class-number
Context config>router>rsvp>diffserv-te
Description This command configures a traffic engineering class. A TE class is defined as:
Eight TE classes are supported. There is no default TE class once Diff-Serv is enabled. The user has
to explicitly define each TE class.
When when Diff-Serv is disabled there will be an internal use of the default CT (CT0) and eight pre-
emption priorities as shown in the following table.
7450 ESS MPLS Guide
FC ID FC Name
7 Network Control
6 High-1
5 Expedited
4 High-2
3 Low-1
2 Assured
1 Low-2
0 Best Effort
can be mapped to a CT.
Values 0 — 7
TE Class = {Class Type (CT), LSP priority}
MPLS and RSVP
FC Designation
NC
H1
EF
H2
L1
AF
L2
BE
Class Type (CT)
7
6
5
4
3
2
1
0
Page 291