Alcatel-Lucent 7450 Manual page 319

Ethernet service switch
Table of Contents

Advertisement

To
LSP Down Time
Path Changes
Retry Timer
Resv Style
Negotiated MTU
FR Hop Limit
LastResignalAt-
tempt
MBB Type
MBB State
End at
Old Metric
NextRetryIn
RetryAttempt
Failure Code
Failure Node
7450 ESS MPLS Guide
Label
The IP address of the egress router for the LSP.
The total time in increments that the LSP path has not been opera-
tional.
The number of path changes this LSP has had. For every path change
(path down, path up, path change), a corresponding syslog/trap (if
enabled) is generated.
The time, in seconds, for LSP re-establishment attempts after an LSP
failure.
se — Specifies a shared reservation environment with a limited res-
ervation scope. This reservation style creates a single reservation over
a link that is shared by an explicit list of senders.
ff — Specifies a shared reservation environment with an explicit
reservation scope. Specifies an explicit list of senders and a distinct
reservation for each of them.
The size of the maximum transmission unit (MTU) that is negotiated
during establishment of the LSP.
The total number of hops a detour LSP can take before merging back
onto the main LSP path.
Displays the system up time when the last attempt to resignal this LSP
was made.
Displays an enumerated integer that specifies the type of make-before-
break (MBB). If none displays then there is no MBB in progress or no
last MBB.
Displays the state of the most recent invocation of the make-before-
break functionality.
Displays the system up time when the last MBB ended.
Displays the cost of the traffic engineered path for the LSP path prior
to MBB.
Displays the amount of time remaining, in seconds, before the next
attempt is made to retry the in-progress MBB.
Displays the number attempts for the MBB is in progress.
Displays the reason code for in-progress MBB failure. A value of none
indicates that no failure has occurred.
Displays the IP address of the node in the LSP path at which the in-
progress MBB failed. When no failure has occurred, this value is none.
Description (Continued)
MPLS and RSVP
Page 319

Advertisement

Table of Contents
loading

Table of Contents