Alcatel-Lucent 7450 Manual page 363

Least Fill
Auto BW
LdpOverRsvp : Enabled
IGP Shortcut: Enabled
IGP LFA
BGPTransTun : Enabled
Oper Metric : Disabled
Prop Adm Grp: Disabled
P2MPInstance: 1
S2L Cfg Cou*: 4
S2l-Name
S2l-Name
S2l-Name
S2l-Name
=======================================================================
srlg-database
Syntax srlg-database [router-id ip-address] [interface ip-address]
Context show>router>mpls
Description This command displays MPLS SRLG database information.
Parameters router-id ip-address — Specifies a 32-bit integer uniquely identifying the router in the Autonomous
interface ip-address — Specifies the IP address of the interface.
7450 ESS MPLS Guide
: Disabled
: Disabled
: Disabled
: path_ipmsi
: path_ipmsi
: path_ipmsi
: path_ipmsi
System. By convention to ensure uniqueness, this may default to the value of one of the router's
IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router.
The router-id can be either the local one or some remote router.
MPLS and RSVP
VprnAutoBind : Enabled
BGP Shortcut : Enabled
IGP Rel Metric : Disabled
P2MP-Inst-type : Primary
S2L Oper Count*: 4
To : 10.20.1.1
To : 10.20.1.2
To : 10.20.1.5
To : 10.20.1.6
Page 363