Alcatel-Lucent 7450 Manual page 493

Received
Sent
Retransmitted
Sample Output
A:ALA-1# show router lmp peer 16843009 control-channel 1
================================================================================
LMP Control Channel 1 Statistics
================================================================================
Admin State:
Remote Id
Hello Interval : 3000
Peer If Addr
Inbound Errors : 100
--------------------------------------------------------------------------------
Message Type
--------------------------------------------------------------------------------
Config
ConfigAck
ConfigNack
Hello
LinkSummary
LinkSummaryAck
LinkSummaryNack
================================================================================
A:ALA-1#
te-link
Syntax te-link [te-link-id] [detail]
te-link te-link-id statistics
Context show>router>lmp
Description This command displays Traffic Engineering (TE) link information.
Parameters
te-link-id — Specifies the ID of a TE Link.
detail — Keyword to display more detailed output.
statistics — Keyword to display TE Link statistics.
Output TE Link Output Fields — The following table describes TE link output fields.
Admin State
7450 ESS MPLS Guide
Label
The total number of received packets of a specific type.
The total number of sent packets of a specific type.
The total number of retransmitted packets of a specific type.
: Out of Service
: 10
: 100.100.100.100
Values 1 — 4294967295 | te-link-name
te-link-name: 32 character (max) name of the TE Link
Label
The administrative state of the TE link.
Description (Continued)
Oper State
Setup Role
Hello Dead Intv : 10000
Outbound Errors : 50
Received
1111
15
1
40
6000
35
400
: Going Down
: Active
Sent Retransmitted
11
6
2
20
500
30
3000
Description
GMPLS
111
N/A
N/A
N/A
10
N/A
N/A
Page 493