Alcatel-Lucent 7450 Manual page 370

status
Syntax status
Context show>router>mpls
Description This command displays MPLS operation information.
Output MPLS Status Output — The following table describes MPLS status output fields.
Admin Status
Oper Status
LSP Counts
FR Object
Resignal Timer
Hold Timer
Sample Output
*A:SR-1/Dut-A# /show router mpls status
=======================================================================
MPLS Status
=======================================================================
Admin Status
Oper Down Reason
FR Object
Hold Timer
Srlg Frr
Page 370
Label
Down — MPLS is administratively disabled.
Up — MPLS is administratively enabled.
Down — MPLS is operationally down.
Up — MPLS is operationally up.
Static LSPs — Displays the count of static LSPs that originate,
transit, and terminate on or through the router.
Dynamic LSPs — Displays the count of dynamic LSPs that origi-
nate, transit, and terminate on or through the router.
Detour LSPs — Displays the count of detour LSPs that originate,
transit, and terminate on or through the router.
Enabled — Specifies that Fast reroute object is signaled for the
LSP.
Disabled — Specifies that Fast reroute object is not signaled for
the LSP.
Enabled — Specifies that the resignal timer is enabled for the LSP.
Disabled — Specifies that the resignal timer is disabled for the
LSP.
Displays the amount of time that the ingress node holds before
programming its data plane and declaring the LSP up to the service
module.
: Up
: n/a
: Enabled
: 1 seconds
: Disabled
Description
Oper Status : Up
Resignal Timer : Disabled
Next Resignal : N/A
Srlg Frr Strict : Disabled
7450 ESS MPLS Guide