Debug Commands - Alcatel-Lucent 7450 Manual

Debug Commands

gmpls
Syntax gmpls [lsp lsp-name] [sender sender-address] [endpoint endpoint-address] [tunnel-id
tunnel-id] [lsp-id lsp-id] [peer peer-node-id]
no gmpls
Context debug>router
Description
This command enables and configures debugging for GMPLS.
The no form of the command disables debugging for GMPLS.
Parameters lsp-name — Debug all GMPLS instances that contain the specified LSP. 80 characters max.
sender-address — Debug all GMPLS instances that contain the specified sender IP address, in dotted
endpoint-address — Debug all GMPLS instances that contain the specified endpoint IP address, in
tunnel-id — Debug all GMPLS instances that contain the specified identifier of a tunnel.
lsp-id — Debug all GMPLS instances that contain the specified identifier of an LSP.
peer-node-id — Debug all GMPLS instances that contain the specified identifier or IP address of a
event
Syntax [no] event
Context debug>router>gmpls
Description
This command enables and disables debugging for specific GMPLS events.
7450 ESS MPLS Guide
decimal notation.
Values
a.b.c.d
dotted decimal notation.
Values a.b.c.d
Values
0 — 4294967295
Values 1 — 65535
peer node.
Values 1 — 4294967295 | a.b.c.d
GMPLS
Page 497