Alcatel-Lucent 7450 Manual page 209

config>router>mpls>lsp-template>egr-stats
Description This command enables accounting and statistical data collection. When applying accounting policies
the data, by default, is collected in the appropriate records and written to the designated billing file.
When the no collect-stats command is issued the statistics are still accumulated by the forwarding
engine. However, the CPU will not obtain the results and write them to the billing file. If a subsequent
collect-stats command is issued then the counters written to the billing file include all the traffic
while the no collect-stats command was in effect.
Default collect-stats
max-stats
Syntax [no] max-stats
Context config>router>mpls>ingr-stats
config>router>mpls>lsp>egr-stats
config>router>mpls>lsp-template>egr-stats
Description
This command enables accounting and statistical data collection. When applying accounting policies
the data, by default, is collected in the appropriate records and written to the designated billing file.
When the no max-stats command is issued the statistics are still accumulated by the forwarding
engine. However, the CPU will not obtain the results and write them to the billing file. If a subsequent
max-stats command is issued then the counters written to the billing file include all the traffic while
the no max-stats command was in effect.
Default
max-stats
dynamic-bypass
Syntax dynamic-bypass [enable | disable]
no dynamic-bypass
Context config>router>mpls
Description This command disables the creation of dynamic bypass LSPs in FRR. One or more manual bypass
LSPs must be configured to protect the primary LSP path at the PLR nodes.
Default
enable
7450 ESS MPLS Guide
MPLS and RSVP
Page 209