Alcatel-Lucent 7450 Manual page 670

Ethernet service switch

Hide thumbs Also See for 7450:

Table of Contents

export-addresses

export-prefixes

export-addresses policy-name [policy-name...(up to 5 max)]

no export-addresses

config>router>ldp>session-parameters>peer

This command specifies the export prefix policy to local addresses advertised to this peer.

Policies are configured in the config>router>policy-options context. A maximum of five policy

names can be specified.

The no form of the command removes the policy from the configuration.

policy-name — The export-prefix route policy name. Allowed values are any string up to 32

characters long composed of printable, 7-bit ASCII characters excluding double quotes. If the

string contains spaces, use double quotes to delimit the start and end of the string. The specified

name(s) must already be defined.

[no] export-prefixes policy-name

config>router>ldp>session-parameters>peer

This command specifies the export route policy used to determine which prefixes received from other

LDP and T-LDP peers are re-distributed to this LDP peer via the LDP/T-LDP session to this peer. A

prefix that is filtered out (deny) will not be exported. A prefix that is filtered in (accept) will be

If no export policy is specified, all FEC prefixes learned will be exported to this LDP peer. This

policy is applied in addition to the global LDP policy and targeted session policy.

Policies are configured in the config>router>policy-options context. A maximum of five policy

names can be specified. Peer address has to be the peer LSR-ID address.

The no form of the command removes the policy from the configuration.

no export-prefixes - no export route policy is specified

policy-name — The export-prefix route policy name. Allowed values are any string up to 32

characters long composed of printable, 7-bit ASCII characters excluding double quotes. If the

string contains spaces, use double quotes to delimit the start and end of the string. The specified

name(s) must already be defined.

7450 ESS MPLS Guide