Modifying Interface Parameters - Alcatel-Lucent 7450 Manual

LDP Configuration Management Tasks

Modifying Interface Parameters

Individual parameters cannot be deleted. The no form of a interface-parameter command reverts
modified values back to the defaults.
The following output displays the default values:
A:ALA-1>config>router>ldp>if-params>if# info detail
----------------------------------------------
----------------------------------------------
Page 636
no bfd-enable
ipv4
no hello
no keepalive
no local-lsr-id
fec-type-capability
p2mp-ipv4 enable
exit
no transport-address
no shutdown
exit
no shutdown
7450 ESS MPLS Guide