Modifying MPLS Static LSP Parameters
In order to modify static LSP parameters, the config>router>mpls>path context must be shut
down first.
The following displays a static LSP configuration example. Refer to the static LSP
configuration on
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
----------------------------------------------
A:ALA-1>config>router>mpls#
7450 ESS MPLS Guide
page
180.
static-lsp "static-LSP"
to 10.10.10.234
push 102704 nexthop 10.10.8.114
no shutdown
exit
no shutdown
MPLS and RSVP
Page 189