Alcatel-Lucent 7450 Manual page 239

bfd-template
Syntax bfd-template name
no bfd-template
Context config>router>mpls>mpls-tp>oam-template
Description
This command configures a named BFD template to be referenced by an OAM template.
Default no bfd-template
Parameters name — Specifies the BFD template name as a text string up to 32 characters in printable 7-bit
protection-template
Syntax protection-template name
no protection-template
Context config>router>mpls>mpls-tp
Description Protection templates are used to define generally applicable protection parameters for MPLS-TP
tunnels. Only linear protection is supported, and so the application of a named template to an MPLS-
TP LSP implies that linear protection is used. A protection template is applied under the MEP context
of the protect-path of an MPLS-TP LSP.
The protection-template command creates or edits a named protection template.
Default
no protection-template
Parameters name — Specifies the protection template name as a text string of up to 32 characters in printable 7-
revertive
Syntax [no] revertive
Context config>router>mpls>mpls-tp>protection-template
Description
This command configured revertive behavior for MPLS-TP linear protection. The protect-tp-path
MEP must be in the shutdown state for of the MPLS-TP LSPs referencing this protection template in
order to change the revertve parameter.
Default revertive
7450 ESS MPLS Guide
ASCII, enclosed in double quotes.
Values
bit ASCII, enclosed in double quotes.
MPLS and RSVP
Page 239