Alcatel-Lucent 7450 Manual page 317

Total Available
*A:SRU4>config>router>mpls# show router mpls label-range
===============================================================================
Label Ranges
===============================================================================
Label Type
-------------------------------------------------------------------------------
Static-lsp
Static-svc
Dynamic
===============================================================================
*A:SRU4>config>router>mpls#
lsp
Syntax lsp lsp-name [status {up|down}] [from ip-address | to ip-address] [detail]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name
lsp count
lsp lsp-name activepath
lsp lsp-name path [path-name] [status {up |down}] [detail]
lsp [lsp-name] path [path-name] mbb
Context show>router>mpls
Description This command displays LSP details.
Parameters
lsp lsp-name — The name of the LSP used in the path.
status up — Displays an LSP that is operationally up.
status down — Displays an LSP that is operationally down.
from ip-address — Displays the IP address of the ingress router for the LSP.
to ip-address — Displays the IP address of the egress router for the LSP.
transit — Displays the number of static LSPs that transit through the router.
terminate — Displays the number of static LSPs that terminate at the router.
lsp count — Displays the total number of LSPs.
activepath — Displays the present path being used to forward traffic.
mbb — Displays make-before-break (MBB) information.
detail — Displays detailed information.
Output MPLS LSP Output — The following table describes MPLS LSP output fields.
LSP Name
7450 ESS MPLS Guide
Label
The number of label values available.
Start Label
32
2048
32768
name] [detail]
Label
The name of the LSP used in the path.
Description
End Label Aging
1023 -
18431 -
131071 258
Description
MPLS and RSVP
Total Available
736
16384
93232
Page 317