System configuration using Enterprise Device Manager
EndHour
EndMinutes
Enabled
Configuring recurring daylight saving time using EDM
Use this procedure to configure the daylight saving time start and end times for a single
occurrence or to recur yearly.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click SNTP/Clock.
3. In the work area, click the SummerTimeRecurring tab.
4. Select the Recurring check box to enable recurring daylight saving time for the
5. In RecurringStartMonth, make a selection from the drop-down list.
6. In RecurringStartWeek., click a button.
7. In RecurringStartDay, make a selection from the drop-down list.
8. In RecurringStartHour, make a selection from the drop-down list.
9. In the RecurringStartMinute dialog box, type a value from 0 to 59.
10. In RecurringEndMonth, make a selection from the drop-down list.
11. In RecurringEndWeek, click a button.
12. In RecurringEndDay, make a selection from the drop-down list.
280
Configuration — System
Variable
switch.
OR
Clear the Recurring check box to disable recurring daylight saving time for the
switch.
Specifies the hour of the particular day when to end the
daylight savings time.
Specifies the minute of the particular hour when to end
the daylight savings time.
Enables or disables day light saving time.
Important:
Before you enable daylight saving time, configure
the feature attributes.
Value
April 2011