Viewing Lldp Neighbor Vlan Id Information Using Edm - Avaya 4524GT Configuration Manual

PortNum
ProtocolIndex
ProtocolId
ProtocolTxEnable

Viewing LLDP neighbor VLAN ID information using EDM

Use the following procedure to view the LLDP VLAN ID properties for the remote system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Neighbor VLAN Id tab.
Variable definitions
The following table describes the Neighbor VLAN ID tab fields.
TimeMark
LocalPortNum
Index
VlanId
Configuration — System
Variable
Variable
LLDP Port dot1 configuration using EDM
Indicates the port number.
Indicates the arbitrary local integer value used by this
agent to identify a particular protocol identity.
Indicates the octet string value used to identify the
protocols associated with the given port of the local
system.
Specifies whether the corresponding Local System
Protocol Identity instance is transmitted on the port.
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote system
information is received.
Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP. An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
Indicates the port VLAN identifier associated with the
remote system. If the remote system does not know
Value
Value
April 2011 305