Retrieving An Ascii Configuration File Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
9. Double-click the cell under the ScriptManual header, and select Upload option to
10. On the toolbar, click Apply.
11. Check the ScriptLastStatusChange field for the file transfer status.
12. Click Apply .
Variable definitions
Use the information in the following table to help you to store the current ASCII switch
configuration file.
Variable
ScriptIndex
ScriptBootPriority
ScriptSource
ScriptManual
Applications
ScriptOperStatus
ScriptLastStatusChange Specifies the time of the last status change as sysUpTime.

Retrieving an ASCII configuration file using EDM

Use the following procedure to retrieve an ASCII configuration file from a TFTP server or from
a USB storage device, and apply it to the switch.
Important:
When you use the TFTP address parameter to perform copy or download commands, the
system overwrites the TFTP server address
244 Configuration — System
transfer the file to a TFTP server or to a USB mass storage device.
If the status of the file upload is manualUploadInProgress, wait for up to 2 minutes,
and then click Refresh to see any new status applied to the upload.
The file upload is complete when the status displays either manualUploadPassed
or manualUploadFailed.
Specifies the unique identifier for ASCII switch configuration
file.
Specifies the boot priority of the ASCII switch configuration file.
Value ranges from 0–127.
Specifies the address where to store the configuration file.
Specifies the operation that you want to perform—upload,
download, or other.
Specifies the application.
Specifies the script operation status.
Value
April 2011