Viewing Lldp Local Port Information Using Edm - Avaya 4524GT Configuration Manual

HardwareRev
FirmwareRev
SoftwareRev
SerialNum
MfgName
ModelName
AssetID
DeviceType
PDPowerSource
PDPowerReq
PSEPowerSource
PDPowerPriority

Viewing LLDP local port information using EDM

Use the following procedure to display LLDP port properties for the local system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
Configuration — System
Variable
Indicates the vendor-specific hardware revision
string.
Indicates the vendor-specific firmware revision
string.
Indicates the vendor-specific software revision string.
Indicates the vendor-specific serial number.
Indicates the vendor-specific manufacturer name.
Indicates the vendor-specific model name.
Indicates the vendor-specific asset tracking identifier
Defines the type of Power-via-MDI (PoE).
• pseDevice
• pdDevice
• none
Defines the type of PD Power Source.
Specifies the value of the power required in 0.1 W
increments by a PD.
Defines the type of PSE Power Source (primary or
back-up).
Defines the Powered Device (PD) power priority.
• critical
• high
• low
LLDP configuration using EDM
Value
April 2011 293