Viewing Remote Ip Tlv Information Using Edm - Avaya 4524GT Configuration Manual

Dot1QFraming

Viewing remote IP TLV information using EDM

Use this procedure to display IP address configuration information received on switch ports
from connected Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Neighbor IP Phone tab.
Variable definition
TimeMark
LocalPortNum
Configuration — System
Variable
Variable
Viewing remote IP TLV information using EDM
Value
Displays the Layer 2 frame tagging mode for the
Avaya IP phone connected to the switch port.
Values include:
• tagged—frames are tagged based on the tagging
value the Avaya IP phone receives with the
LLDP-MED Network Policy TLV.
• non-tagged—frames are not tagged with 802.1Q
priority.
• auto—an attempt is made to tag frames based
on the tagging value the Avaya IP phone receives
with the LLDP-MED Network Policy TLV. If there
is no LLDP-MED Network Policy information
available, an attempt is made to tag frames
based on server configuration. If that fails, traffic
is transmitted untagged.
• The default tagging mode is auto.
Value
Displays the time the latest TLV-based information
is received from an Avaya IP phone.
Displays the number of the switch port on which the
TLV-based information is received.
April 2011 345