System configuration using Enterprise Device Manager
5. Choose copyConfigToNvram in the Action field.
6. On the toolbar, click Apply.
7. Click Refresh.
Variable definitions
Use the information in the following table to save the current configuration.
Variable
AutosaveToNvramEnabled If selected, automatically saves the configuration to the flash
Action
Status
Viewing the agent and image software load status using
EDM
Use the following procedure to display the currently loaded and operational software status for
agent and image loads for an individual switch or a stack.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click File System.
3. In the work area, click the Boot Image tab to view the software status.
248
Configuration — System
OR
Clear the AutosaveToNvramEnabled check box to disable automatically saving
the configuration to the flash memory.
memory.
Indicates the action that you want to perform. Available options
are:
• other
• copyConfigToNvram
Indicates the current status.
Value
April 2011