Global Aes Configuration Using Edm; Enabling Global Aes Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Index
PortPhoneAddressType
PortPhoneAddress
PortPhoneAddressMask
PortPhoneGatewayAddress

Global AES configuration using EDM

Use the information in this section to configure Avaya Energy Saver (AES) for an single switch
or a stack.

Enabling global AES using EDM

Use the following procedure to enable energy saving for the switch.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the EnergySaverEnabled check box.
5. On the toolbar, click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Variable definitions
The following table describes the Energy Saver Globals tab fields.
346 Configuration — System
Variable Value
Displays a unique identifier for the connected
Avaya IP phone.
Displays the IP address type for the Avaya IP phone
connected to the switch port.
Displays the IP address for the Avaya IP phone
connected to the switch port.
Displays the IP address subnet mask for the Avaya
IP phone connected to the switch port.
Displays gateway the IP address for the Avaya IP
phone connected to the switch port.
April 2011