Configuring Daylight Savings Time - Avaya 3500 Quick Start Configuration

[no] clock time-zone <zone> <hours> <minutes>
Variable definitions
The following table describes the parameters for the clock time-zone command.
Variable
zone
hours
minutes
no

Configuring daylight savings time

Configure the daylight savings time with start and end dates, or disable the daylight savings time
feature.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. At the command prompt, enter the following command:
[no] clock summer-time <zone> [date {<day> <month> <year> <hh:mm>}
{<day> <month> <year> <hh:mm>}] [<offset>]
Variable definitions
The following table describes the parameters for the clock summer-time command.
September 2016
Value
Specifies time zone acronym that can be displayed
when showing system time; for example, EST for
Eastern Standard Time.
RANGE: Up to 4 characters
Specify the hours difference from UTC.
RANGE: —12 to + 12
Optional minutes difference from UTC.
RANGE: 0–59
Disables the clock time zone feature
Quick Start Configuration
Comments on this document? infodev@avaya.com
Configuring daylight savings time
29