Clearing the default TFTP server
You can clear the default TFTP server from the switch and reset it to 0.0.0.0 with the following
two commands:
• no tftp-server
This command has no parameters and you run it in Global Configuration command
mode.
• default tftp-server
This command has no parameters and you run it in Global Configuration command
mode.
Configuration files in ACLI
ACLI provides many options for working with configuration files. Through ACLI, you can
display, store, and retrieve configuration files.
For details, see the following sections:
•
•
•
•
•
•
•
•
Displaying the current configuration
To display the current configuration of switch or a stack, use the show running-config
command, with the following syntax, in Privileged EXEC command mode with no parameters:
The syntax of this command is:
show running-config [verbose] [module <value>]
You can enter [module <value>] parameters individually or in combinations.
Configuration - System
Configuration files in ACLI
April 2011
77