Configuring Recurring Daylight Saving Time Using Edm - Avaya 3500 Series Getting Started

Name
TimeZoneAcronym
StartYear
StartMonth
StartDay
StartHour
StartMinutes
EndYear
EndMonth
EndDay
EndHour
EndMinutes
Enabled

Configuring recurring daylight saving time using EDM

Use this procedure to configure the daylight saving time start and end times for a single occurrence
or to recur yearly.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the SummerTimeRecurring tab.
4. Perform one of the following:
• Select the Recurring check box to enable recurring daylight savings time for the switch
OR
• Clear the Recurring check box to disable recurring daylight savings time for the switch.
July 2015
Description
Specifies a time zone acronym.
Specifies the year when you want to start the
daylight savings time.
Specifies the month of each year when you want to
start the daylight savings time.
Specifies the day of the particular month when you
want to start the daylight savings time.
Specifies the hour of the particular day when you
want to start the daylight saving time.
Specifies the minutes of the particular hour when you
want to start the daylight savings time.
Specifies the year when you want to end the daylight
savings time.
Specifies the month of each year when you want to
end daylight savings time.
Specifies the day of the particular month when you
want to end daylight savings time.
Specifies the hour of the particular day when you
want to end daylight savings time.
Specifies the minute of the particular hour when you
want to end daylight savings time.
Enables or disables daylight savings time.
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
Important:
Before you enable daylight savings time,
configure the feature attributes.
Getting Started with Avaya ERS 3500 Series
135