Viewing Neighbor Poe Information Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
8. Click Close to close the dialog box.
9. Click Apply .
Adding civic address location information using EDM
Use this procedure to add civic address-based location information to the neighbor location
table.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Location tab.
6. In the table, select a location with the LocationSubtype listed as civicAddress.
7. On the toolbar, click the Location Details button.
8. Click Close to close the dialog box.
9. Click Apply .

Viewing neighbor PoE information using EDM

Use this procedure to display LLDP PoE properties for the remote system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor PoE tab.
Variable definitions
The following table describes the Neighbor PoE tab fields.
328 Configuration — System
The Insert Local Location dialog box appears.
April 2011