Port-based AES configuration using EDM
Configure port-based AES to enable or disable energy saving for individual ports, or all ports
on a switch or stack.
Enabling AES on individual ports using EDM
Use the following procedure to turn on AES for individual ports on a switch or stack.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the ports tab.
4. Select a Port.
5. In the Port row, double-click the cell in the EnergySaverEnabled column.
6. Select true from the list.
7. Repeat steps 4, 5 and 6 to enable AES for additional ports as required.
8. Click Apply.
9. On the toolbar, you can click Refresh to update the work area data display.
Variable definitions
The following table describes the fields of Ports tab.
Port
EnergySaverEnabled
Disabling AES on individual ports using EDM
Use the following procedure to turn off AES for individual ports on a switch or stack.
Configuration — System
Variable
Indicates the port.
Indicates whether the Avaya Energy Saver feature is
enabled for the port.
Port-based AES configuration using EDM
Value
April 2011
353