Show Lldp Med-Network-Policies Command - Avaya 4524GT Configuration Manual

neighbor {dot1 | dot3 | detail |
med }
[neighbor-mgmt-addr]
Job aid: show lldp port command output
The following figure displays sample output for the show lldp port command with the tx-tlv
variable.

show lldp med-network-policies command

The show lldp med-network-policies command displays LLDP MED policy
information for switch ports. The syntax for the show lldp med-network-policies
command is:
Configuration — System
Variables
To display the transmission status of the optional
management TLVs, include only the tx-tlv parameter in
the command.
The port neighbor TLVs:
The port neighbor LLDP management address.
The switch supports IPv4 and IPv6 management
addresses.
Description
• dot1: displays status for 802.1 TLVs
• dot3: displays status for 802.3 TLVs
• med: displays status for med TLVs
• vendor-specific:displays vendor specific TLV
information
• dot1: displays 802.1 TLVs:
• dot3: displays 802.3 TLVs
• detail: displays all TLVs.
• med: displays MED TLVs
• vendor-specific:displays vendor specific TLV
information
Configuring LLDP using ACLI
April 2011 179