Viewing Lldp Local Poe Information Using Edm - Avaya 4524GT Configuration Manual

Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Local Port Auto-negotiation tab.
Variable definitions
The following table describes the Local Port Auto-negotiation tab fields.
PortNum
AutoNegSupported
AutoNegEnabled
AutoNegAdvertisedCap
OperMauType

Viewing LLDP local PoE information using EDM

Use the following procedure to display LLDP PoE properties for the local system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
Configuration — System
Variable
LLDP Port dot3 configuration using EDM
Indicates the port number.
Indicates whether the local port supports Auto-
negotiation.
Indicates whether Auto-negotiation is enabled on the
local port.
Contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in
IETF RFC 3636) associated with the local port on the
system.
Indicates the value that indicates the operational MAU
type of the given port on the local system.
Value
April 2011 309