AddrIfSubtype
AddrIfId
AddrOID
Viewing LLDP unknown TLV information using EDM
Use the following procedure to display details about unknown TLVs received on the local
system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the Unknown TLV tab.
Variable definitions
The following table describes the Unknown TLV tab fields.
TimeMark
Configuration — System
Variable
Variable
Note:
If you configure both IPv4 and IPv6 management
addresses, the switch displays each on a separate
row.
Indicates the numbering method used to define the
interface number associated with the remote system.
• unknown
• ifIndex
• systemPortNumber
Indicates the integer value used to identify the
interface number of the management address
component associated with the remote system.
Indicates the value used to identify the type of
hardware component or protocol entity associated
with the management address advertised by the
remote system agent.
Indicates the TimeFilter for this entry.
LLDP configuration using EDM
Value
Value
April 2011
299