Displaying Ipv6 Tcp Listeners Using Edm - Avaya 4524GT Configuration Manual

Variable definitions
Use the data in the following table to display IPv6 TCP connections.
LocalAddress
LocalAddressType
LocalPort
RemAddressType
RemAddress
RemPort
State

Displaying IPv6 TCP listeners using EDM

Use the following procedure to display IPv6 TCP listeners.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Listeners tab.
4. Click Refresh to update the information.
Variable definitions
Use the data in the following table to display IPv6 TCP listeners.
LocalAddressType
LocalAddress
Configuration — System
Variable
Variable
Displaying IPv6 TCP listeners using EDM
Value
Indicates the local address.
Indicates the type of the local address.
Indicates the local port.
Indicates the type of the remote address.
Indicates the remote address.
Indicates the remote port.
Enables or disables the state.
Value
Indicates the local IP address type. Values
include IPv4 or IPv6.
Indicates the local IPv4 or IPv6 address.
April 2011 265