ACCESSORIES
15-41
STEREO TAPE PLAYER
R E M O V E AND REPLACE—PONTIAC
(Fig.
15-51
1. Remove stereo tape player side trim panel(s)
by removing two phillips head screws.
2. Remove control knobs, spring, 1/2" nuts and
bezels from control bushings.
3. Remove
screw retaining heater divider duct
and remove duct.
4. Remove rear brace to player assembly 7/16"
nut and star washer and position brace to provide
clearance.
5. Unplug tape player wiring harness and remove
player.
6. To replace, reverse the above.
REMOVE
AND
REPLACE-TEMPEST
(Fig.
15-52)
1. Remove stereo tape player side trim panel by
removing two phillips head screws.
2. Remove control knobs, spring, 1/2" nuts and
bezels from control bushings.
3. Remove heater divider duct from behind tape
player.
4. Remove screws from tape player front support
brackets to dash.
5. Remove rear brace to player nut and position
brace to provide clearance.
6. Unplug tape player wiring harness and remove
player.
7. To replace, reverse above procedure.
Fig. 15-55 Stereo Rear Speakers—Pontiac