Pontiac tempest 1968 Service Manual page 259

6 - 4 2 1968 P O N T I A C SERVICE M A N U A L
(8 C Y L , ENGINES * BOTH SIDES)
F i g . 6 - 7 5 Tempest Engine Insulators
9. Lower rear of engine and transmission so that
rear insulator positions on crossmember. Install
two crossmember to Insulator bolts and washers and
tighten to 30 l b
0
f t . torque.
REAR INSULATOR
1. Remove two crossmember-to-insulator bolts.
2. With suitable lifting equipment, raise trans­
mission at rear to provide clearance for removing
Insulator to transmission housing bolts.
3. Remove two Insulator-to-transmission bolts and
remove Insulator.
F i g . 6 - 7 6 Firebird Engine Insulators