CHASSIS ELECTRICAL SERVICE
12-19
L-6 ENGINE HEAVY DUTY BATTERY
5. Remove terminal nuts securing gauge to cover
plate and detach gauge unit.
F i g . 12-12
Firebird—Battery
Cable Routing
4. To install, reverse above procedure.
HEADLIGHT
SWITCH
6. To install, reverse removal procedure.
WINDSHIELD
WIPER
SWITCH
1. Remove knob.
2. Remove retaining nut securing shaft and bezel.
3. Remove switch and disconnect terminals.
1. Depress button on switch and remove knob and
shaft (Fig. 12-26).
2. Remove retaining nut.
3. Remove wire connector from switch and r e
move switch.
4. On vacuum operated headlight models, remove
vacuum connector
0