Pontiac tempest 1968 Service Manual page 445

7E-10 1968 P O N T I A C SERVICE MANUAL
OUTER
H A N D L E
I N N E R
HANDLE
f BRACKET-PART O F ©
' SHIFTER ASSEMBLY?
MAINTAIN 12"
CLEARANCE
BETWEEN HEAD
OF PIN & SWITCH
NEUTRALIZER
SWITCH
, POSITION GEARSHIFT LEVER
IN DRIVE POSITION.
INSERT SWITCH "DRIVE TANG'
IN SWITCH LEVER AND
ASSEMBLE SWITCH TO SHIFTER
ASSEMBLY.
INSERT ADJUSTING G A G E IN
SWITCH. MOVE GEARSHIFT
LEVER TO PARK POSITION &
REMOVE ADJUSTING G A G E .
SHIFTER
ASSEMBLY
TRANSMISSION
SELECTOR LEVER
BRACKET
"ADJUST"
VIEW A
(ASSEMBLED)
SWITCH LEVER
VIEW C
(ASSEMBLED)
ROTATE TRANSMISSION LEVER
CLOCKWISE TO "PARK" POSITION.
ADJUST PIN TO THIS DIMENSION
PRIOR TO INSTALLATION O F CABLE
Fig. 7 E - 8 Gearshift Controls (Console) - Firebird
3. Remove control valve body attaching screws
and detent roller spring assembly.
NOTE: Do not remove solenoid attaching screws.
4. Remove control valve body assembly and gover­
nor pipes. If care is taken in removing control valve
body, the six (6) check balls will stay in place above
the spacer plate.
CA UTION: Do not drop manual valve.
5. Remove the governor pipes and manual valve
from control valve body.
INSTALLATION
Installation of the control valve body is the reverse
of the removal. Affix new gasket to bottom pan and
adjust oil level.