Pontiac tempest 1968 Service Manual page 289

6-72
1968 P O N T I A C SERVICE MANUAL
OIL
GALLERY
PLUGS
OIL LEVEL
INDICATOR
LOWER TUBE
W A T F E ?
JACKET
PLUG
WATER
CAMSHAFT REAR JACKET
BEARING PLUG PLUG
OIL PASSAGE FROM FILTER
TO REAR MAIN BEARING
AND LEFT OIL GALLERY
OIL PASSAGE FROM
PUMP TO FILTER
F i g . 6-128 Cylinder Block—View From Right Rear
5. Remove fuel pump.
6. Remove harmonic balancer.
7. Remove timing chain cover, fan and pulley.
Remove timing cover mounting studs.
8. Remove fuel pump eccentric and bushing.
9. Slide timing chain and sprockets off end of cam­
shaft and crankshaft.
10. Remove camshaft thrust plate.
11. Remove distributor and high tension wires.
12. Remove coil.
13. Remove starter assembly.
14. Remove intake manifold.
15. Remove push rod cover.
16. Remove oil level indicator.
17. Remove rocker arm covers.
18. Loosen rocker arm nuts, rotate rocker arms
and remove push rods. Store push rods so that they
may be reinstalled in the same position as removed.
19. Remove cylinder heads and exhaust manifolds.
20. Remove cylinder head gaskets.
21. Remove oil filter assembly.
22. Remove valve lifters; use J 3049 if necessary.
Place valve lifters in a storage box so lifters can
be reinstalled in original location.
23. Remove camshaft.