1A-34
1968 P O N T I A C SERVICE M A N U A L
10. Adequately
mark
heater cam and bracket
a s s e m b l y
in
t h r e e
places
to insure proper
reinstallation.
11. Remove heater cam and bracket assembly.
12. Remove front case
to rear
case attaching
screws.
13. Separate front and rear case.
14. Remove screws retaining core attaching bands
and remove core.
15. Replace by reversing the above procedure.
T E M P E S T Fig. 1A-53
1. Remove glove box.
2. Remove lower instrument panel air conditioning
duct and outlet assembly by removing five attaching
screws and retainer.
3. Lower duct and outlet assembly after discon
necting right and left side nozzle connections.
4. Disconnect temperature control cable and vac
uum hose connections.
5. Drain cooling system and remove two water
hoses attached to heater core.